DynaQ Firmware Updates

Modified on Tue, 7 Mar, 2023 at 4:15 PM

Automatic Firmware Update:

Upon an initial device setup, once a Bluetooth connection is made the app will check the firmware status of the device. This is the only time the app will automatically check and update the firmware. If current firmware on the UltraQ is older than the current released version the device will automatically begin the update process. If the control is up to date this process is skipped and the app continues to the main screen. A manual firmware update can be performed at any time from the menu option.

Manual Firmware Update:

To ensure you have the latest version of firmware do the following:

For reference in the app under the name of your device the app should display “Firmware Version X.X.X”. If this is not at least at version 3.0.4 it is highly recommended that you update to the latest version.

Step 1: To update your devices firmware ensure you have a strong Bluetooth connection with your UltraQ and an internet connection with your mobile device.

  1. In the menu within the app press the “Firmware Update” option.
  2. The UltraQ will appear to shutoff while performing the update.
  3. Maintain the connection until the device powers back up and resumes operation.
  4. Check the app to ensure the firmware version has updated, this may take a few seconds to display properly.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article