UltraQ Alarms and Alerts

Modified on Tue, 07 Mar 2023 at 11:40 AM

When the pit temperature is over the target range or when the food temperature has reached its done set-point, an alarm will sound and the control will display the below visual status.

NOTE: Any time the alarm is sounding, press any key on the UltraQ to silence it and clear the alarm condition. 

You can change the sound of your audible alarms or turn them off in the BBQ Guru App. Once you connect your UltraQ to your mobile device click on the hamburger menu in the top left corner > then Alarm Settings > then you can adjust the Alarm Beeps and Alarm Beeps Duration.

Alarm Beeps is the number of times that the control will beep in a 10 second window which can be set from 0 to 9. The default is 5.

Alarm Beep Duration is the length of time that each beep will last which can be set from 0 to 3. The default is 1.

*TIP: If either value is set to 0, no audible alarms will sound on the control device. 

When the UltraQ is connected to power but has no pit probe connected, the display will show “---” and the outer ring will blink rapidly. The audible alarm will not sound. This is a safety feature so the fan will not run unless a pit probe is inserted.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article